| Features: Exclusive, streamlined and very trendy design: ultra-fine satellites blend in seamlessly with your indoor decoration. Total power output: 32 W RMS (2x8 W + 16 W RMS). Peak power: 64 W Each satellite features an active Neodymium transducer Magnetically shielded speakers for an interference-free environment Headphones connector and secondary line input located on remote control Built-in power supply Satellites feature a white lacquer finish, fashionable taupe fabric Satellite dimensions (alone): 23.5 cm H x 5.8 cm L x 7.2 cm D Wooden subwoofer dimensions: 24 cm H x 16.5 cm W x 20.5 cm D 1.8 m cable for connecting audio source * XPS: Extended Personal Sound Specifications: Total power output: 32 W RMS (2x8 W + 16 W) Peak power: 64 W Frequency response: 40 Hz - 20 kHz Satellite dimensions (one): 23.5 (H) x 5.8 (W) x 7.2 (D) cm Subwoofer dimensions: 24 (H) x 16.5 (W) x 20.5 (D) cm Satellites are magnetically shielded: wont disturb your surroundings Product compliant with the RoHS standardBOX CONTENTS :2 satellites + 1 subwoofer 1 wired remote control 1 audio source connection cable 1 power cord Warranty certificate and user manualMINIMUM CONFIGURATION  C with sound board, Mac®, netbook, MP3 player, DVD/CD player, TV set, game consoleTECHNOLOGY : Speaker Unit reproducing an acoustic wave from an electrical signal which vibrates one or more membranes, the movements creating a sound wave. 2.1 System for transmitting sound over three channels, with 2 channels reproducing medium and high range frequencies and 1 channel reproducing bass frequencies. Satellite Satellite is the name given to a speaker which does not reproduce bass frequencies: this speaker is therefore the satellite to a subwoofer. In a X.1 kit (2.1, 4.1, 5.1 , 6.1 or 7.1), the digit before the point 1, i.e. the 2, 4, 5, 6 or 7, represents the number of satellites in the speaker kit. Subwoofer The subwoofer is a speaker which reproduces bass frequencies, and is often larger than other types of speakers as bass frequencies require larger membranes than is the case with high or medium frequencies. A single subwoofer is most often included in a speaker kit: as bass frequencies are transmitted all around the membrane (omnidirectionally) and not just in front of the membrane, a single subwoofer is sufficient to provide rich bass sound all across an area, as long as it is powerful enough. In a X.1 kit (2.1, 4.1, 5.1, 6.1 or 7.1), the digit after the period, i.e. the 1, signifies that 1 subwoofer is included. Watts RMS Power in Watts RMS represents the continuous electrical power delivered by an amplifier to speakers. Watts Peak Power Watts Peak Power represents the peak electrical power delivered by an amplifier to speakers. Magnetic shielding Magnetic shielding shields against the magnetic field generated by speakers, for example. If a speaker is touching a CRT screen (television or computer), magnetic shielding is necessary to avoid disturbing the display. Headphone plug Stereo audio output allowing for the connection of stereo headphones. A headphone plug uses a connector in 3.5mm mini-jack format. RCA An RCA connector (also known as a phono connector) is a connector used to transfer analog signals. Analog audio: RCA is the most commonly used connector for connecting Hi-Fi components to one another. Each RCA plug transfers one channel: the left channel via a white RCA plug, the right channel via a red RCA plug. Composite video: composite video is generally transmitted via a yellow RCA plug. RCA is also used to transfer a stereo or 5.1 (Dolby Digital or DTS) digital S/PDIF signal over a single connector, between a DVD player and a Dolby decoder, for example. An RCA connector is composed of a circular central pin 2mm in diameter, which carries the signal, insulated inside of a ring which surrounds the central pin without touching it, at a distance of 2mm from the pin. Line input Analog audio input designed to receive an unamplified sound signal. There are 2 line levels: the general public line level, at -10dBv: this is the signal output level of a Hi-Fi component connected to an amplifier via a connector known as a line input. The professional line level, at +4dBu, is much more powerful, and is used to connect studio or public-address (PA) equipment. 需要的话请联系我，QQ：49399157 电话：0403683982 |
| 欢迎光临 [ A.U.PEOPLE 澳群澳洲珀斯Perth华人网官方网租房二手车招工二手买卖黄页退税税务Tax Return 珀斯 悉尼 墨尔本 布里斯班 阿德莱德 堪培拉] (https://aupeopleweb.com.au/1/aupeople/) | Powered by Discuz! X3.2 |
